Slow or missing fill? Check water supplies and visible hoses before choosing an inlet valve.
Check supplies and inlet hoses
With the washer stopped, check whether the required water supplies are available and the visible hoses are bent or pinched. Follow the model’s supply requirements. Do not remove hoses while water is on or pull a heavy machine out alone.
Choose what you observedChecks before choosing a replacement
Choose a finding for the next action. A symptom can have more than one cause.
A hose is pinched or the supply is closed
Next check or action: Correct the accessible supply condition safely and follow the normal cycle instructions. This finding does not establish an inlet-valve failure.
The supply looks normal but filling is slow
Next check or action: Inlet screens or another fill-path condition may require inspection. Use the owner instructions before disconnecting hoses; do not remove or damage valve screens.
Water enters when the washer should be off
Next check or action: Close the supply if safely possible and stop using the machine. A valve or another fill-system fault needs assessment before operation resumes.
Only one temperature path is affected
Next check or action: Record the selected cycle and which supply path appears involved. Supply conditions and model operation must be distinguished from a valve fault.
How this component fits the system
Supply valves → inlet hoses → inlet valve → tub. A restriction upstream can resemble a valve fault.
Confirm the part before purchase
Verify the full washer model, manufacturer part number and supersession, water connections, and documented access. Port count or appearance does not establish compatibility.
Resolution: confirm what changed
A valve replacement becomes a candidate only after the external supply and documented fill checks support it. Access, hose routing and electrical connections vary. Use the exact model’s repair instructions or qualified service.
Did the check resolve the problem?
Yes, normal operation returned
Record the correction and check for recurrence during safe normal use. A returning symptom needs further diagnosis.
No, or I could not verify it
Keep the result as unconfirmed. Do not buy a component from the symptom alone. Obtain the model-specific next check or a service diagnosis.
Is this a suitable DIY check?
Visible supply and hose checks: beginner. Valve replacement: internal water and electrical work, model-dependent.
Repair, parts or replacement?
Compare the verified valve, labor and associated hose costs with the washer’s warranty and condition. Do not choose a part by the number of visible hose ports alone. Include any other confirmed failures in the repair-versus-replace comparison.
Use an actual quote rather than an assumed average. Include diagnostic fees, the verified part, labor, taxes, installation or removal charges, and any warranty coverage. Keep unconfirmed faults out of the comparison.
Keep these details with your checks
Record the complete model number, front-load or top-load design, cycle stage and exact message. Photograph visible findings without opening the cabinet.
Technical information and sources
These manufacturer references support general principles for the products they describe. Their measurements, tests, reset procedures and part matches must be verified for your full model.
valve part number and supersession, coil test specifications, water supply requirements, cabinet access and hose routing, fitment, repair cost inputs. Obtain the relevant manufacturer instructions or a verified service diagnosis before using these details.